Charging equipment

BMW

Item No.: 10367986

Manufacturer No.: 61902472538

7,7 kW, T1, UL

BMW

Item No.: 10005589

Manufacturer No.: 61902472421

The compact BMW Wallbox Essential can be flexibly and easily connected to the household power grid. Thanks to a powerful charging capacity of up to 22 kW/three-phase, it effectively shortens the charging time. With a cable length of up to 5 m, the wallbox also opens up great flexibility in the choice of parking space. The installation and handling as well as the cable management of the wallbox are kept simple. Installation costs are low due to the integrated DC fault detection. The ergonomic and high-quality design is characterized by selected, high-quality and environmentally friendly materials. The housing contains recycled material and is made of resistant plastic. The high-quality multi-layer coating of the exterior parts meets the highest demands. It protects the wallbox permanently and contributes to a coherent image with the vehicle. The wallbox supports the vehicle-specific "time-controlled charging" function. This makes it possible to charge vehicles exclusively at certain times and thus take advantage of particularly favorable electricity rates, for example. Pre-air conditioning of the vehicle is also possible. So in the morning you will find a charged and already pre-heated or -cooled vehicle. The energy required for this is provided by the wallbox when the vehicle is connected and thus saved during the journey - to maximize the range. The status display of the wallbox is shown by an LED bar on the front of the wallbox. The display on the wallbox means that you can always see the current charging status, even from a greater distance. Mounting instructions: -To ensure that the wallbox works safely and reliably in the house circuit, it must be installed and connected by a skilled tradesman. Depending on the country, country-specific regulations must be observed and complied with during connection. -The wiring from the house installation to the wallbox as well as the fuse protection is specific to each market and connection case and is determined by the specialist tradesman on site.

BMW

Item No.: 10367966

Manufacturer No.: 61902420915

7,4 kW, T1, TW

BMW

Item No.: 10367963

Manufacturer No.: 61902420911

22 kW, GB, CQC

BMW

Item No.: 10367965

Manufacturer No.: 61902420913

The Wallbox Plus is a home charging station for Battery Electric Vehicles (BEV) and Plug-in Hybrid Electric Vehicles (PHEV). This allows you to charge your vehicle safely, quickly and independently at home. The wallbox was developed taking into account numerous customer requirements and the experience of the first generation of wallboxes. Furthermore, attention was paid to design, material, safety and sustainable production. Note country version: This wallbox is only for the countries France and Italy! -RFID recognition: The built-in chip card reader allows a maximum of 3 vehicles (3 cards) to be connected to the Wallbox Plus. The integrated lock function allows charging only after authentication with a paired card. -Charge management: the charging energy is regulated with the help of an external electricity meter (not included) to ensure the maximum available charging current and at the same time prevent an overload in the house network. -The Wallbox Plus can be controlled with a smartphone via app (iOS, Android). -A connection of the Wallbox Plus to smart home systems guarantees full integration into the household. On the BMW i service page for charging products, you will find an overview of currently compatible smart home systems. -You can display all relevant data in the app via the recorded charging history. -Compared to the OUC base cable supplied with the vehicle, the wallbox achieves up to 6 times the charging speed. -A DC fault detection is already integrated in the Wallbox Plus and thus contributes to significant savings in installation costs. -Maximum charging convenience: The cable is wound up and unwound around the Wallbox Plus; no bending is required for this. -Plug & Play: When the plug is connected to the vehicle, charging starts automatically without the need for any further operating steps (when the RFID card reader is deactivated). -22 kW, T2S, IEC Design and Material: -The ergonomic and high-quality design is characterized by selected, high-quality and environmentally friendly materials. The housing contains recycled material and is made of durable plastic. -The high-quality multi-layer coating of the exterior parts meets the highest demands. It protects the wallbox permanently and contributes to a harmonious image with the vehicle. -Weather resistance: The wallbox can be permanently mounted inside and outside. Safety: -All installed components are certified according to international standards and tested by the BMW Group. -All-in-one service: you can take advantage of professional advice from staff, the installation service and the BMW Group hotline. -The BMW Group, together with a partner, offers expert installation by an electrician. -The wallbox offers a high level of safety across all countries by meeting all country-specific requirements, as well as electrical protection class IP54 and mechanical protection class IK08. The wallbox contains all safety-related modules for safe and reliable charging of the vehicle. Sustainable production: -Responsible for the development of the wallbox is a supplier with certification for sustainable production in the field of electric vehicle charging. -Sustainable mobility: The environmentally conscious image of electric vehicles is transferred to the drivers. Functionality: -The energy meter for load management must be ordered separately. A list of possible meters can be found in the installation instructions. -The wallbox can be flexibly and easily connected to the house network. -The wallbox supports the vehicle-specific function "time-controlled charging". This makes it possible to charge vehicles exclusively at certain times and thus take advantage of particularly favorable electricity rates, for example. -Vehicle pre-conditioning: The temperature in the vehicle can be preset. In the morning, you will find your vehicle charged and already preheated or cooled. The energy required for this is provided by the wallbox when the vehicle is connected and thus saved during the journey - to maximize the range. -The status display of the wallbox is shown by an LED bar on the front of the wallbox. The display on the wallbox means that you can always see the current charging status, even from a distance. Necessary additional parts: -The energy meter for load management must be ordered separately. A list of possible meters can be found in the installation instructions. -The cabling from the house installation to the wallbox as well as the fuse protection is specific for each market and connection case and is determined by the skilled craftsman on site.

BMW

Item No.: 10010150

Manufacturer No.: 61902420905

The Wallbox Plus is a home charging station for Battery Electric Vehicles (BEV) and Plug-in Hybrid Electric Vehicles (PHEV). This allows you to charge your vehicle safely, quickly and independently at home. The wallbox was developed taking into account numerous customer requirements and the experience of the first generation of wallboxes. Furthermore, attention was paid to design, material, safety and sustainable production. -RFID recognition: The built-in chip card reader allows a maximum of 3 vehicles (3 cards) to be connected to the Wallbox Plus. The integrated lock function allows charging only after authentication with a paired card. -Charge management: the charging energy is regulated with the help of an external electricity meter (not included) to ensure the maximum available charging current and at the same time prevent an overload in the house network. -The Wallbox Plus can be controlled with a smartphone via app (iOS, Android). -A connection of the Wallbox Plus to smart home systems guarantees full integration into the household. On the BMW i service page for charging products, you will find an overview of currently compatible smart home systems. -You can display all relevant data in the app via the recorded charging history. -Compared to the OUC base cable supplied with the vehicle, the wallbox achieves up to 6 times the charging speed. -A DC fault detection is already integrated in the Wallbox Plus and thus contributes to significant savings in installation costs. -Maximum charging convenience: The cable is wound up and unwound around the Wallbox Plus; no bending is required for this. -Plug & Play: When the plug is connected to the vehicle, charging starts automatically without the need for any further operating steps (when the RFID card reader is deactivated). Design and Material: -The ergonomic and high-quality design is characterized by selected, high-quality and environmentally friendly materials. The housing contains recycled material and is made of durable plastic. -The high-quality multi-layer coating of the exterior parts meets the highest demands. It protects the wallbox permanently and contributes to a harmonious image with the vehicle. -Weather resistance: The wallbox can be permanently mounted inside and outside. Safety: -All installed components are certified according to international standards and tested by the BMW Group. -All-in-one service: you can take advantage of professional advice from staff, the installation service and the BMW Group hotline. -The BMW Group, together with a partner, offers expert installation by an electrician. -The wallbox offers a high level of safety across all countries by meeting all country-specific requirements, as well as electrical protection class IP54 and mechanical protection class IK08. The wallbox contains all safety-related modules for safe and reliable charging of the vehicle. Sustainable production: -Responsible for the development of the wallbox is a supplier with certification for sustainable production in the field of electric vehicle charging. -Sustainable mobility: The environmentally conscious image of electric vehicles is transferred to the drivers. Functionality: -The energy meter for load management must be ordered separately. A list of possible meters can be found in the installation instructions. -The wallbox can be flexibly and easily connected to the house network. -The wallbox supports the vehicle-specific function "time-controlled charging". This makes it possible to charge vehicles exclusively at certain times and thus take advantage of particularly favorable electricity rates, for example. -Vehicle pre-conditioning: The temperature in the vehicle can be preset. In the morning, you will find your vehicle charged and already preheated or cooled. The energy required for this is provided by the wallbox when the vehicle is connected and thus saved during the journey - to maximize the range. -The status display of the wallbox is shown by an LED bar on the front of the wallbox. The display on the wallbox means that you can always see the current charging status, even from a distance. Necessary additional parts: -The energy meter for load management must be ordered separately. A list of possible meters can be found in the installation instructions. -The cabling from the house installation to the wallbox as well as the fuse protection is specific for each market and connection case and is determined by the skilled craftsman on site.

BMW

Item No.: 10367967

Manufacturer No.: 61902420916

7,7 kW, T1, UL

BMW

Item No.: 10010151

Manufacturer No.: 61902420912

The Wallbox Connect is a home charging station for Battery Electric Vehicles (BEV) and Plug-in Hybrid Electric Vehicles (PHEV). This allows you to charge your vehicle safely, quickly and independently at home. The wallbox was developed taking into account numerous customer requirements and the experience of the first generation of wallboxes. Furthermore, attention was paid to design, material, safety and sustainable production. -RFID recognition: The built-in chip card reader allows a maximum of 3 vehicles (3 cards) to be connected to the Wallbox Connect. The integrated lock function allows charging only after authentication with a paired card. -Charge management: the charging energy is regulated using an external electricity meter (not included) to ensure the maximum available charging current while preventing overload in the home network. -The intelligent charging of the wallbox is possible with additional digital charging services, such as the use of the cheapest electricity until the next trip. -The Wallbox Connect can be controlled with a smartphone via app (iOS, Android). -A connection of the Wallbox Connect to smart home systems guarantees full integration into the household. On the BMW i service page for charging products, you will find an overview of currently compatible smart home systems. -You can display all relevant data in the app via the recorded charging history. -Convenient and easy integration into the home network, such as a connection to the home solar system. -Compared to the OUC base cable supplied with the vehicle, the wallbox achieves up to 6 times the charging speed. -DC fault detection is already integrated in the Wallbox Connect and thus contributes to significant savings in installation costs. -Maximum charging convenience: The cable is wound up and unwound around the Wallbox Connect, there is no need to bend down for this. -Plug & Play: When the plug is connected to the vehicle, charging starts automatically without the need for any further operating steps (if the RFID card reader is deactivated). Design and Material: -The ergonomic and high-quality design is characterized by selected, high-quality and environmentally friendly materials. The housing contains recycled material and is made of durable plastic. -The high-quality multi-layer coating of the exterior parts meets the highest demands. It protects the wallbox permanently and contributes to a harmonious image with the vehicle. -Weather resistance: The wallbox can be permanently mounted inside and outside. Safety: -All installed components are certified according to international standards and tested by the BMW Group. -All-in-one service: you can take advantage of professional advice from staff, the installation service and the BMW Group hotline. -The BMW Group, together with a partner (Deutsche Telekom Technischer Service GmbH), offers expert installation by an electrician. -The installation of the BMW i Wallbox Connect is not without risk. An incorrect procedure here can also result in damage to the BMW i Wallbox. Therefore, it is absolutely necessary that you have the installation, initial start-up and maintenance of the BMW i Wallbox carried out by appropriately trained, qualified and authorized electricians. Only then will the warranty be fully valid. If the installation is carried out independently or by another service provider, BMW (i) shall not assume any liability in the event of damage. -A voucher is required for the installation. You can obtain this voucher and all other information from our customer service. The wallbox offers a high level of safety across all countries by meeting all country-specific requirements, as well as the electrical protection class IP54 and the mechanical protection class IK08. The wallbox contains all safety-related modules for safe and reliable charging of the vehicle. Sustainable production: -Responsible for the development of the wallbox is a supplier with certification for sustainable production in the field of electric vehicle charging. -Sustainable mobility: The environmentally conscious image of electric vehicles is transferred to the drivers. Comparison with the competition: -The all-in-one installation service ensures professional and expert installation of the wallbox at your site. The service team will advise you on all matters relating to the correct charging of the electric vehicle, the handling and positioning of the wallbox, and the best parking position for the electric vehicle. -The Mobile Service can be used to call customer service in the event of a fault - perfect service from a single source. -The Wallbox Connect was developed for 3-phase charging. -Depending on availability in the market, the Wallbox Connect can be connected to the BMW Group's Digital Charging Service (DCS). This can be used, for example, for intelligent charging plan calculation or billing of energy costs. Functionality: -The energy meter for load management must be ordered separately. A list of possible meters can be found in the installation instructions. -In connection with DCS remote software updates are possible. -The wallbox can be flexibly and easily connected to the house network. -The wallbox supports the vehicle-specific function "time-controlled charging". This makes it possible to charge vehicles exclusively at certain times and thus take advantage of particularly favorable electricity rates, for example. -Vehicle pre-conditioning: The temperature in the vehicle can be preset. In the morning, you will find your vehicle charged and already preheated or cooled. The energy required for this is provided by the wallbox when the vehicle is connected and thus saved during the journey - to maximize the range. -The status display of the wallbox is shown by an LED bar on the front of the wallbox. The display on the wallbox means that you can always see the current charging status, even from a distance.

BMW

Item No.: 10367962

Manufacturer No.: 61902420908

WB Plus/Conn

BMW / MINI

Item No.: 10005580

Manufacturer No.: 61905A13025

With the BMW & MINI charging cable for public charging stations, Plug-in Hybrid Electric Vehicles (PHEV) can be charged quickly and reliably at public charging stations. By transmitting the high charging currents, the Plug-in Hybrid can be charged up to three times faster than with the standard charging cable. Thanks to the spiralization and the perfectly fitting cable bag, the MINI charging cable is ideally packaged for transport. The enclosed gloves allow clean handling, even in rain and slush. The design of the MINI charging cable is perfectly matched to the design of the vehicle, contributing to the overall MINI Electric image. The charging cable is equipped with coding, allowing the charging station and vehicle to determine the maximum permissible current. Optimum charging performance is achieved without overloading the charging cable. The ergonomically shaped plugs are robustly manufactured and fit comfortably in the hand. Matching them to the charging ports of the MINI vehicles facilitates daily handling. Notice: The charging cable can be used in all countries that support the Type 2 standard for plugs. Designed according to charging mode 3/Mode 3. Thus, the charging cable can be used at all correspondingly designed charging stations.

BMW

Item No.: 10367979

Manufacturer No.: 61902455069

With the BMW Group charging cable for public charging stations, Plug-in Hybrid Electric Vehicles (PHEV) and Battery Electric Vehicles (BEV) can be charged quickly and reliably at public charging stations. The BMW Group charging cable can be used in all countries that support the Type 2 standard for plugs. Designed according to charging mode 3. This means that the charging cable can be used at all correspondingly designed charging stations. -Transmission of charging currents of up to 32 amperes. Charging processes with up to 7.4 kW are thus possible (depending on the vehicle). This allows the electric vehicle to be charged up to three times faster than with the standard charging cable. -The single-phase charging cable offers an optimal price-performance ratio for BMW and MINI PHEV vehicles that can only charge single-phase. -The spiralization and perfectly fitting cable pocket make the charging cable ideally packaged for transport. -The coordinated design of the charging cable and wallbox creates an attractive overall package with the appropriate solution for flexible charging in each case - at home and on the road. -The BMW Group charging cable has been validated with all BMW and MINI PHEV and BEV models and meets BMW Group quality standards. -The silver-plated and corrosion-resistant contacts significantly reduce electrical resistance. The resulting longevity as well as the increased electrical safety are not achieved by commercially available cables with brass contacts. Functionality: -The charging cable is equipped with coding, allowing the charging station and vehicle to determine the maximum allowable current. Optimal charging performance is achieved without overloading the charging cable. -The ergonomically shaped plugs are robustly manufactured and fit comfortably in the hand. -The coordination with the charging connectors of BMW and MINI vehicles facilitates daily handling. Technical data: -Connections: Type 2 on both sides -charging mode 3/mode 3 -halogen free -flame retardant -oil resistant -maximum charging capacity: 1 x 32 A or 7.4 kW with single-phase connection type (L1, N, PE)

BMW

Item No.: 10010154

Manufacturer No.: 61902455071

With the BMW charging cable for public charging stations, Plug-in Hybrid Electric Vehicles (PHEV) and Battery Electric Vehicles (BEV) can be charged quickly and reliably at public charging stations. -The cable is halogen-free, flame-retardant and oil-resistant. -Transmission of charging currents of up to 32 amps. Charging processes with up to 7.4 kW are thus possible (depending on the vehicle). This allows the electric vehicle to be charged up to three times -faster than with the standard charging cable. -The single-phase BMW charging cable offers an optimal price-performance ratio for BMW PHEV vehicles that can only charge single-phase. -The spiralization and perfectly fitting cable pouch make the BMW charging cable ideally packaged for transport. -The 8-meter long version allows convenient charging of the large BMW PHEV models in various parking positions. -The enclosed gloves allow clean handling, even in rain and slush. -The coordinated design of the BMW charging cable and BMW wallbox creates an attractive overall package with the right solution for flexible charging - at home and on the road. -The BMW charging cable has been tested with all BMW PHEV and BEV models and meets the BMW Group quality standards. -The silver-plated and corrosion-resistant contacts significantly reduce electrical resistance. The resulting longevity as well as the increased electrical safety are not achieved by commercially available cables with brass contacts. -The BMW charging cable is equipped with coding, allowing the charging station and vehicle to determine the maximum permissible current. Optimal charging performance is achieved without overloading the charging cable. -The ergonomically shaped plugs are robustly manufactured and fit comfortably in the hand. -The matching to the charging connectors of the BMW vehicles facilitates the daily handling. -The BMW charging cable can be used in all countries that support the Type 2 standard for plugs. -Designed according to charging mode 3/Mode 3. This means that the BMW charging cable can be used at all correspondingly designed charging stations.

BMW / MINI

Item No.: 10013337

Manufacturer No.: 61905A13024

With the BMW charging cable for public charging stations, Plug-in Hybrid Electric Vehicles (PHEV) and Battery Electric Vehicles (BEV) can be charged quickly and reliably at public charging stations. -transmission of charging currents of up to 32 amps. Charging processes with up to 7.4 kW are thus possible (depending on the vehicle). This allows the electric vehicle to be charged up to three times faster than with the standard charging cable. -The single-phase BMW charging cable offers an optimal price-performance ratio for BMW PHEV vehicles that can only charge single-phase. -The spiralization and perfectly fitting cable pouch make the BMW charging cable ideally packaged for transport. -The enclosed gloves allow clean handling, even in rain and slush. -The coordinated design of the BMW charging cable and BMW wallbox creates an attractive overall package with the right solution for flexible charging - at home and on the road. -The BMW charging cable has been validated with all BMW PHEV and BEV models and meets BMW Group quality standards. -The silver-plated and corrosion-resistant contacts significantly reduce electrical resistance. The resulting longevity as well as increased electrical safety are not matched by commercially available cables with brass contacts. -The BMW charging cable is equipped with coding, allowing the charging station and vehicle to determine the maximum permissible current. Optimal charging performance is achieved without overloading the charging cable. -The ergonomically shaped plugs are robustly manufactured and fit comfortably in the hand. -The matching to the charging connectors of the BMW vehicles facilitates the daily handling. -The BMW charging cable can be used in all countries that support the Type 2 standard for plugs. -Designed according to charging mode 3/Mode 3. This means that the BMW charging cable can be used at all correspondingly designed charging stations. Technical data: -charging mode 3/mode 3 -Halogen-free -Flame resistant -Oil resistant -Maximum charging power: 1 x 32 A or 7.4 kW with single-phase connection (L1, N, PE)

BMW

Item No.: 10017634

Manufacturer No.: 61900003163

With the charging cable for public charging stations, Plugin Hybrid Electric Vehicles (PHEV), such as the BMW 330e, can be charged quickly and reliably at public charging stations. Unlike the previous AC fast charging cable, 3-phase charging with up to 22 kW power is supported. -Greatest possible flexibility: transmission of charging currents of up to 32 A per phase. Thus, 1-phase charging with up to 7.4 kW or 3-phase with max. 22 kW is possible (depending on the vehicle). -The flat spiralization and the perfectly fitting cable bag make the charging cable ideally packed for transport. -The enclosed gloves allow a "clean" handling, even in rain and slush. -The coordinated design of the charging cable and wallbox creates an attractive overall package with the appropriate solution for flexible charging - at home and on the road. -The charging cable has been validated with all BMW PHEV models and meets BMW Group quality standards. -The silver-plated and corrosion-resistant contacts significantly reduce electrical resistance. The resulting longevity as well as increased electrical safety are not matched by commercially available cables with brass contacts. -The innovative spiralization creates weight and volume savings (approx. 60% lighter). -Functionality: -The cable is equipped with coding, allowing the charging station and vehicle to determine the maximum current allowed. Optimal charging performance is achieved without overloading the charging cable. -The geometry of the charging plug has been adapted to optimize compatibility with public charging infrastructure. -The ergonomically shaped plugs are robustly manufactured and fit comfortably in the hand. -The matching to the charging connectors of the BMW vehicles facilitates the daily handling. -Technical data: -Connections: Type 2 on both sides (ECE) -Charge mode: 3/Mode 3 -Length: 5.0 meters -Halogen-free -Flame retardant -Oil resistant -Temperature resistant: -30° C to +80° C -Maximum charging capacity: 3 x 32 A or 22 kW with 3-phase connection (L1, L2, L3, N, PE) -Type 2 plug designed according to ECE standard makes the charging cable suitable for use throughout Europe

BMW

Item No.: 10368018

Manufacturer No.: 61905A2AA98