Brake pad, sport pad

BMW

Item No.: 10009995

Manufacturer No.: 34112283365

The S4007 brake pad is derived from a proven long-track racing pad used in racing. It was specially developed with regard to increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following significantly different properties compared to the standard brake pad are to be noted urgently: Reduced comfort: the brake pad can cause significantly more noise. However, the function is not restricted by this. The design of the brake force distribution is race-oriented. This means that dynamic steering on the brakes is supported and differs significantly from the standard configuration. Increased stress on the brake discs: Due to the changed friction mechanisms, the brake disc wears faster. Therefore, it is recommended to replace the brake disc when installing this brake pad. It is absolutely necessary to replace the brake disc in the case of cracks from 13 mm even before the wear of the brake pad. -Shorter braking distance. -Improved brake response. -Higher thermal load capacity.

BMW

Item No.: 10008689

Manufacturer No.: 34112283764

The S4007 brake pad is derived from a proven long-track racing pad used in racing. It was specially developed with regard to increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). -Shorter braking distance. -Better brake response. -Higher thermal load capacity. The following significantly different characteristics compared to the standard brake pad should be noted urgently: - Reduced comfort: the brake pad can cause significantly more noise. However, the function is not restricted by this. - The design of the brake force distribution is race-oriented. This means that dynamic steering on the brakes is supported and differs significantly from the standard configuration. - Increased stress on the brake discs: Due to the changed friction mechanisms, the brake disc wears faster. Therefore, it is recommended to replace the brake disc when installing this brake pad. It is absolutely necessary to replace the brake disc in the case of cracks from 13 mm even before the wear of the brake pad. The vehicle must be run in carefully for the first 200 km after installation of the sports brake! After that, the full effectiveness of the sports brake is given.

BMW

Item No.: 10017453

Manufacturer No.: 34112365765

The S4007 or TX4007 brake pad (new product designation from F90 vehicles) is derived from a proven long-distance racing pad used in racing. It was specially developed with regard to increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following, significantly different properties compared to the standard brake pad are urgent to note: -Diminished comfort: the brake pad can cause significantly more noise. However, the function is not restricted by this. -The design of the brake force distribution is race-oriented. This means that dynamic steering on the brakes is supported and differs significantly from the standard configuration. -Increased stress on the brake discs: Due to the changed friction mechanisms, the brake disc wears faster. Therefore, it is recommended that the brake disc is also replaced when this brake pad is installed. It is absolutely necessary to replace the brake disc in the case of cracks from 13 mm even before the brake pad wears out. Safety instructions: Installation only in conjunction with new brake discs (the brake discs of the M vehicles are all perforated)! Due to the special properties, the lining reacts even more sensitively to external influences such as rim cleaner, road salt and parking the vehicle with wet brake disc. Therefore, operation in winter is not recommended. Likewise, direct spraying of brake pad and disc with rim cleaner is to be avoided.

BMW

Item No.: 10009996

Manufacturer No.: 34108092822

The TX4007 brake pad (new product designation from F90 vehicles) is derived from a proven endurance racing pad used in racing. It was specially developed with regard to increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following, clearly different characteristics in comparison to the series brake pad are to be considered urgently: Reduced comfort: the brake pad can cause significantly more noise. However, the function is not restricted by this. The design of the brake force distribution is race-oriented. This means that dynamic steering on the brakes is supported and differs significantly from the standard configuration. Increased stress on the brake discs: Due to the changed friction mechanisms, the brake disc wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is installed. It is absolutely necessary to replace the brake disc in the case of cracks from 13 mm even before the brake pad wears out. Safety instructions: Installation only in conjunction with new brake discs (the brake discs of the M vehicles are all perforated)! Due to the special properties, the lining reacts even more sensitively to external influences such as rim cleaner, road salt and parking the vehicle with wet brake disc. Therefore, operation in winter is not recommended. Likewise, direct spraying of brake pad and disc with rim cleaner is to be avoided.

BMW

Item No.: 10158546

Manufacturer No.: 34108094045

TX4007

BMW

Item No.: 10009993

Manufacturer No.: 34208092823

The TX4007 brake pad (new product designation from F90 vehicles) is derived from a proven endurance racing pad used in racing. It was specially developed with regard to increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following, clearly different characteristics in comparison to the series brake pad are to be considered urgently: Reduced comfort: the brake pad can cause significantly more noise. However, the function is not restricted by this. The design of the brake force distribution is race-oriented. This means that dynamic steering on the brakes is supported and differs significantly from the standard configuration. Increased stress on the brake discs: Due to the changed friction mechanisms, the brake disc wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is installed. It is mandatory to replace the brake disc in case of cracks from 13 mm also before the brake pad wears out. Safety instructions: Installation only in conjunction with new brake discs (the brake discs of the M vehicles are all perforated)! Due to the special properties, the lining reacts even more sensitively to external influences such as rim cleaner, road salt and parking the vehicle with wet brake disc. Therefore, operation in winter is not recommended. Likewise, direct spraying of brake pad and disc with rim cleaner is to be avoided.

BMW

Item No.: 10008721

Manufacturer No.: 34212283366

The S4007 brake pad is derived from a proven endurance racing pad used in racing. It was specially developed with regard to increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following significantly different characteristics compared to the standard brake pad must be urgently noted: - Reduced comfort: the brake pad can cause significantly more noise. However, the function is not restricted by this. - The design of the brake force distribution is race-oriented. This means that dynamic steering on the brakes is supported and differs significantly from the standard configuration. - Increased stress on the brake discs: Due to the changed friction mechanisms, the brake disc wears faster. Therefore, it is recommended to replace the brake disc when installing this brake pad. It is absolutely necessary to replace the brake disc in the case of cracks from 13 mm even before the wear of the brake pad. -Shorter braking distance -Better brake response -Higher thermal load capacity

BMW

Item No.: 10008725

Manufacturer No.: 34212365766

The S4007 or TX4007 brake pad (new product designation from F90 vehicles) is derived from a proven long-distance racing pad used in racing. It was specially developed with regard to increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following, significantly different properties compared to the standard brake pad are urgent to note: -Diminished comfort: the brake pad can cause significantly more noise. However, the function is not restricted by this. -The design of the brake force distribution is race-oriented. This means that dynamic steering on the brakes is supported and differs significantly from the standard configuration. -Increased stress on the brake discs: Due to the changed friction mechanisms, the brake disc wears faster. Therefore, it is recommended that the brake disc is also replaced when this brake pad is installed. It is absolutely necessary to replace the brake disc in the case of cracks from 13 mm even before the brake pad wears out. Safety instructions: Installation only in conjunction with new brake discs (the brake discs of the M vehicles are all perforated)! Due to the special properties, the lining reacts even more sensitively to external influences such as rim cleaner, road salt and parking the vehicle with wet brake disc. Therefore, operation in winter is not recommended. Likewise, direct spraying of brake pad and disc with rim cleaner is to be avoided.

BMW

Item No.: 10017415

Manufacturer No.: 34212284466

The S4007 or TX4007 brake pad (new product designation from F90 vehicles) is derived from a proven long-distance racing pad used in racing. It was specially developed with regard to increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following significantly different properties compared to the standard brake pad must be urgently observed: The design of the brake force distribution is racing-oriented. This means that dynamic steering on the brakes is supported and differs significantly from the standard configuration. Increased stress on the brake discs: Due to the changed friction mechanisms, the brake disc wears faster. Therefore, it is recommended to replace the brake disc when installing this brake pad. It is absolutely necessary to replace the brake disc in the case of cracks from 13 mm even before the wear of the brake pad. -shorter braking distance -better brake response -higher thermal load capacity Safety instructions: Installation only in conjunction with new brake discs (the brake discs of the M vehicles are all perforated)! Due to the special properties, the lining reacts even more sensitively to external influences such as rim cleaner, road salt and parking the vehicle with a wet brake disc. Therefore, operation in winter is not recommended. Likewise, direct spraying of brake pad and disc with rim cleaner is to be avoided.

BMW

Item No.: 10009994

Manufacturer No.: 34112284465

The S4007 brake pad is derived from a proven endurance racing pad used in racing. It was specially developed with regard to increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). -Shorter braking distance. -Better brake response. -Higher thermal load capacity. -Reduced comfort: The brake pad can cause significantly more noise. However, the function is not limited by this. -The design of the brake force distribution is race-oriented. This means that dynamic steering on the brakes is supported and differs significantly from the standard configuration. -Increased stress on the brake discs: Due to the changed friction mechanisms, the brake disc wears faster. Therefore, it is recommended to replace the brake disc when installing this brake pad. The replacement of the brake disc is mandatory for cracks from 13 mm even before the wear of the brake pad.

BMW

Item No.: 10009989

Manufacturer No.: 34219501835

The S4007 brake pad is derived from a proven endurance racing pad used in racing. It was specially developed with regard to increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). -Shorter braking distance. -Better brake response. -Higher thermal load capacity. -The design of the brake force distribution is race-oriented. This means that dynamic steering on the brakes is supported and differs significantly from the standard configuration. -Increased stress on the brake discs: Due to the changed friction mechanisms, the brake disc wears faster. Therefore, it is recommended to replace the brake disc when installing this brake pad. The replacement of the brake disc is mandatory for cracks from 13 mm even before the wear of the brake pad.

BMW

Item No.: 10009991

Manufacturer No.: 34112284765

The S4007 brake pad is derived from a proven endurance racing pad used in racing. It was specially developed with regard to increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following significantly different properties compared to the standard brake pad must be urgently observed: The design of the brake force distribution is racing-oriented. This means that dynamic steering on the brakes is supported and differs significantly from the standard configuration. Increased stress on the brake discs: Due to the changed friction mechanisms, the brake disc wears faster. Therefore, it is recommended to replace the brake disc when installing this brake pad. It is absolutely necessary to replace the brake disc in the case of cracks from 13 mm even before the wear of the brake pad. -Shorter braking distance. -Improved brake response. -Higher thermal load capacity.

BMW

Item No.: 10009990

Manufacturer No.: 34212284766

The S4007 brake pad is derived from a proven endurance racing pad used in racing. It was specially developed with regard to increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following significantly different characteristics compared to the standard brake pad must be urgently observed: The design of the brake force distribution is racing-oriented. This means that dynamic steering on the brakes is supported and differs significantly from the standard configuration. Increased stress on the brake discs: Due to the changed friction mechanisms, the brake disc wears faster. Therefore, it is recommended to replace the brake disc when installing this brake pad. It is absolutely necessary to replace the brake disc in the case of cracks from 13 mm even before the wear of the brake pad. -Shorter braking distance. -Improved brake response. -Higher thermal load capacity.

BMW

Item No.: 10017499

Manufacturer No.: 34109502514

The S4007 or TX4007 brake pad (new product designation from F90 vehicles) is derived from a proven long-distance racing pad used in racing. It was specially developed with regard to increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following significantly different characteristics compared to the standard brake pad must be urgently noted: Reduced comfort: the brake pad can cause significantly more noise. However, this does not restrict the function The design of the brake force distribution is race-oriented. This means that dynamic steering on the brakes is supported and differs significantly from the standard configuration. Increased stress on the brake discs: Due to the changed friction mechanisms, the brake disc wears faster. Therefore, it is recommended to replace the brake disc when installing this brake pad. It is absolutely necessary to replace the brake disc in the case of cracks from 13 mm even before the wear of the brake pad. -shorter braking distance -better brake response -higher thermal load capacity Safety instructions: Installation only in conjunction with new brake discs (the brake discs of the M vehicles are all perforated)! Due to the special properties, the lining reacts even more sensitively to external influences such as rim cleaner, road salt and parking the vehicle with wet brake disc. Therefore, operation in winter is not recommended. Likewise, direct spraying of brake pad and disc with rim cleaner is to be avoided.