Security kit auxiliary battery
Select a vehicle in the vehicle garage to display matching products.
BMW
AGM integral battery
Item No.: 10001008
Manufacturer No.: 61219394648
The original BMW battery with AGM technology (Absorbant Glass Mat) is a high-performance component in the vehicle. It is supplied ready for installation and offers a number of technical innovations. The battery is filled with sulphuric acid, which is 100% bound in mats made of glass fiber fleece. When current is drawn, it flows from the negative to the positive electrode as usual. Original BMW batteries with AGM technology are twice as fast in terms of current consumption and output compared to calcium batteries. BMW models that have already been equipped with AGM technology ex works also require a battery with AGM technology when the battery is replaced. Original BMW batteries with AGM technology are particularly recommended for models with high energy requirements and high cyclical loads. -Additional battery for Integral Active Steering (SA 02VH) -Energy can be released more quickly (especially with high energy consumption) -Heart of the BMW EfficientDynamics technologies -safe even when the battery is deeply discharged -Long service life, even when stationary and in storage -Greatly reduced gas leakage, as the gases are converted back into water via a special chemical cycle neither gas nor electrolyte is lost -The gas is only blown off via a pressure relief valve when the pressure builds up too high (20 - 200 milibar) -No ingress of atmospheric oxygen through the pressure relief valve -Recharging function particularly relevant for vehicles with BMW EfficientDynamics technology such as brake energy recovery and auto start/stop function -Higher capacity stability -more reliable starting at low temperatures -safe starting of engines with high starting current requirements -Low risk in the event of an accident, reduced environmental risk (due to 100% acid binding)
1-3 Working Days
2-3 Working Days
These products are not intended for assembly by an end user. Installation is to be carried out exclusively by persons with appropriate specialist training or by a specialist automotive company.