BMW M Performance

BMW

Item No.: 10003054

Manufacturer No.: 18302349216

Original BMW M Performance tailpipe trim chrome incl. trim bumper rear below. Suitable for the X5 with the engine 25d and 25dX. Only suitable for vehicles with the following features: -with exterior design Pure Excellence or -with exterior design Pure Experience

BMW

Item No.: 10008768

Manufacturer No.: 18302349668

The tailpipe trim made of chrome in 8-cylinder optics enhances the vehicle again visually - it looks more striking, dynamic and uncompromising. The tailpipe trim is made of high-quality stainless steel, high-gloss chrome-plated and has a high corrosion resistance and durability. -The trim is "designed by BMW" and offers the vehicle a noble upgrade: It gives a particularly striking look, which suggests an 8-cylinder engine. -The tailpipe trim in 8-cylinder look makes the X5 more imposing and extravagant. -The design of the trim corresponds to the X5 8-cylinder vehicles. With this trim, the rear of the vehicle is hardly distinguishable from an 8-cylinder series. -The tailpipe trim is manufactured in the highest quality. It is made of chrome-plated stainless steel and has a very long service life. -Easy installation: The tailpipe trim chrome is firmly connected to the inner funnel and the funnels are already welded to the tether pipe. They only need to be attached to the existing mufflers with the help of a clamp. -Tested quality: All legal requirements are met and no additional approvals or entries in the vehicle documents are required. Design, material and safety meet the usual high BMW standards. Technical information: -The muffler must be trimmed before installation. -The rear skirt lower part must be replaced. -On gasoline vehicles, the tailpipe trim eliminates the exhaust flap. When starting up and driving at low speeds, this may result in slightly increased noise levels.

BMW

Item No.: 10008771

Manufacturer No.: 18302349683

The tailpipe trim made of chrome in 8-cylinder optics enhances the vehicle again visually - it looks more striking, dynamic and uncompromising. The tailpipe trim is made of high-quality stainless steel, high-gloss chrome-plated and has a high corrosion resistance and durability. -The trim is "designed by BMW" and offers the vehicle a noble upgrade: It gives a particularly striking look, which suggests an 8-cylinder engine. -The tailpipe trim in 8-cylinder look makes the X5 more imposing and extravagant. -The design of the trim corresponds to the X5 8-cylinder vehicles. With this trim, the rear of the vehicle is hardly distinguishable from an 8-cylinder series. -The tailpipe trim is manufactured in the highest quality. It is made of chrome-plated stainless steel and has a very long service life. -Easy installation: The tailpipe trim chrome is firmly connected to the inner funnel and the funnels are already welded to the tether pipe. They only need to be attached to the existing mufflers with the help of a clamp. -Tested quality: All legal requirements are met and no additional approvals or entries in the vehicle documents are required. Design, material and safety meet the usual high BMW standards. Technical information: -The muffler must be trimmed before installation. -The rear skirt lower part must be replaced. -On gasoline vehicles, the tailpipe trim eliminates the exhaust flap. When starting up and driving at low speeds, this may result in slightly increased noise levels.

BMW

Item No.: 10008767

Manufacturer No.: 18302349213

The tailpipe trim made of chrome in 8-cylinder optics enhances the vehicle again visually - it looks more striking, dynamic and uncompromising. The tailpipe trim is made of high-quality stainless steel, high-gloss chrome-plated and has a high corrosion resistance and durability. -The trim is "designed by BMW" and offers the vehicle a noble upgrade: It gives a particularly striking look, which suggests an 8-cylinder engine. -The tailpipe trim in 8-cylinder look makes the X5 more imposing and extravagant. -The design of the trim corresponds to the X5 8-cylinder vehicles. With this trim, the rear of the vehicle is hardly distinguishable from an 8-cylinder series. -The tailpipe trim is manufactured in the highest quality. It is made of chrome-plated stainless steel and has a very long service life. -Easy installation: The tailpipe trim chrome is firmly connected to the inner funnel and the funnels are already welded to the tether pipe. They only need to be attached to the existing mufflers with the help of a clamp. -Tested quality: All legal requirements are met and no additional approvals or entries in the vehicle documents are required. Design, material and safety meet the usual high BMW standards. Technical information: -The muffler must be trimmed before installation. -The rear skirt lower part must be replaced. -On gasoline vehicles, the tailpipe trim eliminates the exhaust flap. When starting up and driving at low speeds, this may result in slightly increased noise levels.

BMW

Item No.: 10003053

Manufacturer No.: 18302349214

Original BMW M Performance tailpipe trim chrome incl. trim bumper rear below. Suitable for the X5 with the engine 25d and 25dX. Only suitable for vehicles with the following features: -without M Sport Package -without exterior design Pure Excellence -without exterior design Pure Experience -without M aerodynamics package

BMW

Item No.: 10008769

Manufacturer No.: 18302349212

The tailpipe trim made of chrome in 8-cylinder optics enhances the vehicle again visually - it looks more striking, dynamic and uncompromising. The tailpipe trim is made of high-quality stainless steel, high-gloss chrome-plated and has a high corrosion resistance and durability. -The trim is "designed by BMW" and offers the vehicle a noble upgrade: It gives a particularly striking look, which suggests an 8-cylinder engine. -The tailpipe trim in 8-cylinder look makes the X5 more imposing and extravagant. -The design of the trim corresponds to the X5 8-cylinder vehicles. With this trim, the rear of the vehicle is hardly distinguishable from an 8-cylinder series. -The tailpipe trim is manufactured in the highest quality. It is made of chrome-plated stainless steel and has a very long service life. -Easy installation: The tailpipe trim chrome is firmly connected to the inner funnel and the funnels are already welded to the tether pipe. They only need to be attached to the existing mufflers with the help of a clamp. -Tested quality: All legal requirements are met and no additional approvals or entries in the vehicle documents are required. Design, material and safety meet the usual high BMW standards. Technical information: -The muffler must be trimmed before installation. -The rear skirt lower part must be replaced. -On gasoline vehicles, the tailpipe trim eliminates the exhaust flap. When starting up and driving at low speeds, this may result in slightly increased noise levels.

BMW

Item No.: 10005634

Manufacturer No.: 18302344205

Stainless steel silencer system with improved exhaust gas routing. The acoustics have been optimized in sound quality and volume to further enhance the typical BMW straight-six character. The system provides an outstanding, sporty sound in the exterior and interior and was developed with the latest CAD and FEM technology for optimum fit and OEM quality.

BMW

Item No.: 10009025

Manufacturer No.: 18302349679

With this trim, a tailpipe trim in the 8-cylinder look is offered for the 6-cylinder vehicles. The high-gloss chrome-plated stainless steel trim is already welded to the connecting pipe and can be attached to the existing exhaust system with the help of a clamp. This must be trimmed beforehand. Your advantages: -Striking appearance of the rear of the vehicle. -No welding of the trim necessary. -All parts made of high quality stainless steel to ensure high durability and corrosion resistance. -Cromed surface. Scope of delivery: -Welded tailpipe trim on connecting pipe -Clamp.

BMW

Item No.: 10119738

Manufacturer No.: 18302455297

D=75,6mm

BMW

Item No.: 10120665

Manufacturer No.: 18307791587

D=70,6mm

BMW / MINI

Item No.: 10007183

Manufacturer No.: 18307560781

The clamping sleeve/pipe connector (ø 75 mm) component offers the possibility of repairing a repair section on the exhaust system quickly and cost-effectively. Elaborate welding work and time-consuming adjustment are no longer necessary. -Low assembly costs: no additional work (e.g. welding) or special tools are required. -The clamping sleeves are made of stainless steel and are therefore absolutely corrosion and heat resistant. -Easy assembly: time-saving but still high-strength, heavy-duty and absolutely gas-tight due to special technology. -Double-walled with screw connection.

BMW

Item No.: 10003035

Manufacturer No.: 18302287154

Original BMW M Performance set of tailpipe trims chrome (left and right) in 8 cylinder look. Suitable for the X5 with the engine 35i xDrive (N55). The M Performance tailpipe trims now fit in conjunction with the aerodynamic rear.

BMW

Item No.: 10003036

Manufacturer No.: 18302287155

Original BMW M Performance set of tailpipe trims chrome (left and right) in 8 cylinder look. Suitable for the X5 with the engine 30d xDrive (N57). The M Performance tailpipe trims now fit in conjunction with the aerodynamic rear.

BMW

Item No.: 10003037

Manufacturer No.: 18302349672

Original BMW M Performance set of tailpipe trims chrome (left and right) in 8 cylinder look. Suitable for the X5 with the engine 25d with and without xDrive (B47 and N47S1). The M Performance tailpipe trims now fit in conjunction with the aerodynamic rear.