PROFILINE PerfectFinish

Description

Sonax PROFILINE Perfect Finish was specially developed for 1-step polishing of locally sanded out paint damage such as dust inclusions or runners. The special nano-abrasives enable good scratch removal with optimum gloss without causing holograms or buffing strokes on the paint. It removes sanding up to P2000 grit and is also silicone-free. Alternatively, the finish can also be applied with an eccentric if only finishing is required. Application: If necessary, sand the paint first with P2000 grit sandpaper (or finer) or pre-polish with SONAX Cutmax. Use a speed-controlled rotary polisher with SONAX Foam Pad medium or SONAX Foam Pad soft. -Always lay the pad flat. -Never polish completely dry. -Perform several individual polishing steps with the addition of small amounts of polish instead of one long polishing pass. -Wipe off polish residues with SONAX Microfibre cloth ultra fine under light pressure. -Always check the polishing result in between by wiping with SONAX PROFILINE Prepare on a SONAX Microfibre cloth ultrafine and then illuminating with a hologram lamp. -Alternatively, it can also be used with an eccentric if only finishing is required. -Do not overheat the polishing area. -Clean polishing pads regularly and never use different polishing agents on one pad.