Service, brakes

BMW

Item No.: 10159988

Manufacturer No.: 34118054825

In addition, the following parts are mandatory: brake pads, brake pad sensor and brake pad paste.

BMW

Item No.: 10159989

Manufacturer No.: 34118054826

In addition, the following parts are mandatory: brake pads, brake pad sensor and brake pad paste.

BMW

Item No.: 10158665

Manufacturer No.: 34108746107

BMW

Item No.: 10009996

Manufacturer No.: 34108092822

The TX4007 brake pad (new product designation from F90 vehicles) is derived from a proven endurance racing pad used in racing. It was specially developed with regard to increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following, clearly different characteristics in comparison to the series brake pad are to be considered urgently: Reduced comfort: the brake pad can cause significantly more noise. However, the function is not restricted by this. The design of the brake force distribution is race-oriented. This means that dynamic steering on the brakes is supported and differs significantly from the standard configuration. Increased stress on the brake discs: Due to the changed friction mechanisms, the brake disc wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is installed. It is absolutely necessary to replace the brake disc in the case of cracks from 13 mm even before the brake pad wears out. Safety instructions: Installation only in conjunction with new brake discs (the brake discs of the M vehicles are all perforated)! Due to the special properties, the lining reacts even more sensitively to external influences such as rim cleaner, road salt and parking the vehicle with wet brake disc. Therefore, operation in winter is not recommended. Likewise, direct spraying of brake pad and disc with rim cleaner is to be avoided.

BMW

Item No.: 10158522

Manufacturer No.: 34107886853

BMW

Item No.: 10164912

Manufacturer No.: 34358074297

BMW

Item No.: 10160003

Manufacturer No.: 34118089941

BMW

Item No.: 10159951

Manufacturer No.: 34117845749

BMW

Item No.: 10160363

Manufacturer No.: 34208074285

In addition, the following parts are mandatory: brake pads, brake pad sensor and brake pad paste.

BMW

Item No.: 10160364

Manufacturer No.: 34208074286

In addition, the following parts are mandatory: brake pads, brake pad sensor and brake pad paste.

BMW

Item No.: 10161475

Manufacturer No.: 34217991043

BMW

Item No.: 10009993

Manufacturer No.: 34208092823

The TX4007 brake pad (new product designation from F90 vehicles) is derived from a proven endurance racing pad used in racing. It was specially developed with regard to increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following, clearly different characteristics in comparison to the series brake pad are to be considered urgently: Reduced comfort: the brake pad can cause significantly more noise. However, the function is not restricted by this. The design of the brake force distribution is race-oriented. This means that dynamic steering on the brakes is supported and differs significantly from the standard configuration. Increased stress on the brake discs: Due to the changed friction mechanisms, the brake disc wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is installed. It is mandatory to replace the brake disc in case of cracks from 13 mm also before the brake pad wears out. Safety instructions: Installation only in conjunction with new brake discs (the brake discs of the M vehicles are all perforated)! Due to the special properties, the lining reacts even more sensitively to external influences such as rim cleaner, road salt and parking the vehicle with wet brake disc. Therefore, operation in winter is not recommended. Likewise, direct spraying of brake pad and disc with rim cleaner is to be avoided.

BMW

Item No.: 10164891

Manufacturer No.: 34356870352

BMW

Item No.: 10160646

Manufacturer No.: 34211161806

M8X14

BMW

Item No.: 10158758

Manufacturer No.: 34111123072

M8X12

BMW

Item No.: 10158378

Manufacturer No.: 34106864424

M12X1,5X43 ZNS3

BMW

Item No.: 10158378

Manufacturer No.: 34106864424

M12X1,5X43 ZNS3

BMW

Item No.: 10412445

Manufacturer No.: 83192158851

The brake pad paste is a service and repair product.

BMW

Item No.: 10412488

Manufacturer No.: 83192362037

The Safety Cleaner 2.0 achieves excellent cleaning performance with the lowest hazard potential. Use: -Maintenance and repair -Coupling repairs -degreasing of all assembly parts -for heavily soiled or oily/greasy parts -Safety cleaner 2.0 for maintenance, repair and assembly work. -Reduced health hazard as n-hexane-free*. -Saves resources by using renewable raw materials. -Removes dust, incrustations, oil, grease, resin and anti-corrosion coatings. -Reduced risk of fire and fire consequences. -formulation independently tested by TÜV Süd. State-of-the-art cleaning technology. -Lowest hazard potential. -recommended product according to the Ordinance on Hazardous Substances (protection level 2). The surfaces to be treated must be mechanically freed from coarse dirt and sufficiently sprayed until the surface is clean and bright. In case of heavy soiling, the treatment may have to be repeated.