Service, brakes

BMW

Item No.: 10159988

Manufacturer No.: 34118054825

In addition, the following parts are mandatory: brake pads, brake pad sensor and brake pad paste.

BMW

Item No.: 10159989

Manufacturer No.: 34118054826

In addition, the following parts are mandatory: brake pads, brake pad sensor and brake pad paste.

BMW

Item No.: 10158528

Manufacturer No.: 34108064560

BMW

Item No.: 10158530

Manufacturer No.: 34108064562

BMW

Item No.: 10158529

Manufacturer No.: 34108064561

BMW

Item No.: 10158546

Manufacturer No.: 34108094045

TX4007

BMW

Item No.: 10164890

Manufacturer No.: 34356870351

BMW

Item No.: 10159718

Manufacturer No.: 34116872573

BMW

Item No.: 10159717

Manufacturer No.: 34116872572

BMW

Item No.: 10159990

Manufacturer No.: 34118054827

370X24

BMW

Item No.: 10159991

Manufacturer No.: 34118054828

370X24

BMW

Item No.: 10160368

Manufacturer No.: 34208093728

BMW

Item No.: 10017415

Manufacturer No.: 34212284466

The S4007 or TX4007 brake pad (new product designation from F90 vehicles) is derived from a proven long-distance racing pad used in racing. It was specially developed with regard to increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following significantly different properties compared to the standard brake pad must be urgently observed: The design of the brake force distribution is racing-oriented. This means that dynamic steering on the brakes is supported and differs significantly from the standard configuration. Increased stress on the brake discs: Due to the changed friction mechanisms, the brake disc wears faster. Therefore, it is recommended to replace the brake disc when installing this brake pad. It is absolutely necessary to replace the brake disc in the case of cracks from 13 mm even before the wear of the brake pad. -shorter braking distance -better brake response -higher thermal load capacity Safety instructions: Installation only in conjunction with new brake discs (the brake discs of the M vehicles are all perforated)! Due to the special properties, the lining reacts even more sensitively to external influences such as rim cleaner, road salt and parking the vehicle with a wet brake disc. Therefore, operation in winter is not recommended. Likewise, direct spraying of brake pad and disc with rim cleaner is to be avoided.

BMW

Item No.: 10164889

Manufacturer No.: 34356870350

BMW

Item No.: 10164896

Manufacturer No.: 34356880543

BMW

Item No.: 10158758

Manufacturer No.: 34111123072

M8X12

BMW

Item No.: 10158378

Manufacturer No.: 34106864424

M12X1,5X43 ZNS3

BMW

Item No.: 10158378

Manufacturer No.: 34106864424

M12X1,5X43 ZNS3

BMW

Item No.: 10412450

Manufacturer No.: 83192180000

3 g

BMW

Item No.: 10412445

Manufacturer No.: 83192158851

The brake pad paste is a service and repair product.

BMW

Item No.: 10412488

Manufacturer No.: 83192362037

The Safety Cleaner 2.0 achieves excellent cleaning performance with the lowest hazard potential. Use: -Maintenance and repair -Coupling repairs -degreasing of all assembly parts -for heavily soiled or oily/greasy parts -Safety cleaner 2.0 for maintenance, repair and assembly work. -Reduced health hazard as n-hexane-free*. -Saves resources by using renewable raw materials. -Removes dust, incrustations, oil, grease, resin and anti-corrosion coatings. -Reduced risk of fire and fire consequences. -formulation independently tested by TÜV Süd. State-of-the-art cleaning technology. -Lowest hazard potential. -recommended product according to the Ordinance on Hazardous Substances (protection level 2). The surfaces to be treated must be mechanically freed from coarse dirt and sufficiently sprayed until the surface is clean and bright. In case of heavy soiling, the treatment may have to be repeated.