Service, brakes

BMW

Item No.: 10159140

Manufacturer No.: 34112284801

410X38

BMW

Item No.: 10159141

Manufacturer No.: 34112284802

410X38

BMW

Item No.: 10159127

Manufacturer No.: 34112284101

400X36

BMW

Item No.: 10159128

Manufacturer No.: 34112284102

400X36

BMW

Item No.: 10159129

Manufacturer No.: 34112284370

BMW

Item No.: 10159148

Manufacturer No.: 34112284869

BMW

Item No.: 10009994

Manufacturer No.: 34112284465

The S4007 brake pad is derived from a proven endurance racing pad used in racing. It was specially developed with regard to increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). -Shorter braking distance. -Better brake response. -Higher thermal load capacity. -Reduced comfort: The brake pad can cause significantly more noise. However, the function is not limited by this. -The design of the brake force distribution is race-oriented. This means that dynamic steering on the brakes is supported and differs significantly from the standard configuration. -Increased stress on the brake discs: Due to the changed friction mechanisms, the brake disc wears faster. Therefore, it is recommended to replace the brake disc when installing this brake pad. The replacement of the brake disc is mandatory for cracks from 13 mm even before the wear of the brake pad.

BMW

Item No.: 10164855

Manufacturer No.: 34356791958

BMW

Item No.: 10160842

Manufacturer No.: 34212284803

396X26

BMW

Item No.: 10160843

Manufacturer No.: 34212284804

396x26mm

BMW

Item No.: 10160829

Manufacturer No.: 34212284103

396X24

BMW

Item No.: 10160830

Manufacturer No.: 34212284104

396X24

BMW

Item No.: 10160834

Manufacturer No.: 34212284389

BMW

Item No.: 10017415

Manufacturer No.: 34212284466

The S4007 or TX4007 brake pad (new product designation from F90 vehicles) is derived from a proven long-distance racing pad used in racing. It was specially developed with regard to increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following significantly different properties compared to the standard brake pad must be urgently observed: The design of the brake force distribution is racing-oriented. This means that dynamic steering on the brakes is supported and differs significantly from the standard configuration. Increased stress on the brake discs: Due to the changed friction mechanisms, the brake disc wears faster. Therefore, it is recommended to replace the brake disc when installing this brake pad. It is absolutely necessary to replace the brake disc in the case of cracks from 13 mm even before the wear of the brake pad. -shorter braking distance -better brake response -higher thermal load capacity Safety instructions: Installation only in conjunction with new brake discs (the brake discs of the M vehicles are all perforated)! Due to the special properties, the lining reacts even more sensitively to external influences such as rim cleaner, road salt and parking the vehicle with a wet brake disc. Therefore, operation in winter is not recommended. Likewise, direct spraying of brake pad and disc with rim cleaner is to be avoided.

BMW

Item No.: 10160835

Manufacturer No.: 34212284390

BMW

Item No.: 10164816

Manufacturer No.: 34352284343

BMW

Item No.: 10158758

Manufacturer No.: 34111123072

M8X12

BMW

Item No.: 10160646

Manufacturer No.: 34211161806

M8X14

BMW

Item No.: 10159130

Manufacturer No.: 34112284376

M12X1,5

BMW

Item No.: 10159131

Manufacturer No.: 34112284399

M12X1,5-10.9

BMW

Item No.: 10158378

Manufacturer No.: 34106864424

M12X1,5X43 ZNS3

BMW

Item No.: 10412445

Manufacturer No.: 83192158851

The brake pad paste is a service and repair product.

BMW

Item No.: 10412488

Manufacturer No.: 83192362037

The Safety Cleaner 2.0 achieves excellent cleaning performance with the lowest hazard potential. Use: -Maintenance and repair -Coupling repairs -degreasing of all assembly parts -for heavily soiled or oily/greasy parts -Safety cleaner 2.0 for maintenance, repair and assembly work. -Reduced health hazard as n-hexane-free*. -Saves resources by using renewable raw materials. -Removes dust, incrustations, oil, grease, resin and anti-corrosion coatings. -Reduced risk of fire and fire consequences. -formulation independently tested by TÜV Süd. State-of-the-art cleaning technology. -Lowest hazard potential. -recommended product according to the Ordinance on Hazardous Substances (protection level 2). The surfaces to be treated must be mechanically freed from coarse dirt and sufficiently sprayed until the surface is clean and bright. In case of heavy soiling, the treatment may have to be repeated.