Rear wheel brake, brake pad sensor

BMW

Item No.: 10160825

Manufacturer No.: 34212283393

BMW

Item No.: 10160826

Manufacturer No.: 34212283394

BMW

Item No.: 10160816

Manufacturer No.: 34212283163

BMW

Item No.: 10160817

Manufacturer No.: 34212283164

BMW

Item No.: 10161449

Manufacturer No.: 34217845137

tornadorot

BMW

Item No.: 10161450

Manufacturer No.: 34217845138

tornadorot

BMW

Item No.: 10159114

Manufacturer No.: 34112283359

BMW

Item No.: 10160818

Manufacturer No.: 34212283172

BMW

Item No.: 10161448

Manufacturer No.: 34217845136

tornadorot

BMW

Item No.: 10158378

Manufacturer No.: 34106864424

M12X1,5X43 ZNS3

MINI

Item No.: 10159451

Manufacturer No.: 34116772428

M12X1,5X32 ZNS3

BMW

Item No.: 10158787

Manufacturer No.: 34111153198

BMW

Item No.: 10159367

Manufacturer No.: 34116758107

BMW

Item No.: 10158811

Manufacturer No.: 34111157041

BMW

Item No.: 10158804

Manufacturer No.: 34111154979

BMW

Item No.: 10161297

Manufacturer No.: 34216869617

BMW

Item No.: 10160807

Manufacturer No.: 34212282198

BMW

Item No.: 10161005

Manufacturer No.: 34216753682

BMW

Item No.: 10160831

Manufacturer No.: 34212284296

BMW

Item No.: 10160839

Manufacturer No.: 34212284685

BMW

Item No.: 10008721

Manufacturer No.: 34212283366

The S4007 brake pad is derived from a proven endurance racing pad used in racing. It was specially developed with regard to increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following significantly different characteristics compared to the standard brake pad must be urgently noted: - Reduced comfort: the brake pad can cause significantly more noise. However, the function is not restricted by this. - The design of the brake force distribution is race-oriented. This means that dynamic steering on the brakes is supported and differs significantly from the standard configuration. - Increased stress on the brake discs: Due to the changed friction mechanisms, the brake disc wears faster. Therefore, it is recommended to replace the brake disc when installing this brake pad. It is absolutely necessary to replace the brake disc in the case of cracks from 13 mm even before the wear of the brake pad. -Shorter braking distance -Better brake response -Higher thermal load capacity

BMW

Item No.: 10164813

Manufacturer No.: 34352283035

BMW

Item No.: 10164842

Manufacturer No.: 34356789445

BMW

Item No.: 10164845

Manufacturer No.: 34356789493

BMW

Item No.: 10412445

Manufacturer No.: 83192158851

The brake pad paste is a service and repair product.