Chain drive

BMW Motorrad

Item No.: 10158272

Manufacturer No.: 33818551930

127

BMW Motorrad

Item No.: 10136098

Manufacturer No.: 27727720938

BMW Motorrad

Item No.: 10126401

Manufacturer No.: 23008569917

Z=17

BMW Motorrad

Item No.: 10158289

Manufacturer No.: 33848527635

Z=45

BMW Motorrad

Item No.: 10136025

Manufacturer No.: 27717724142

BMW Motorrad

Item No.: 10155664

Manufacturer No.: 33358553744

BMW Motorrad

Item No.: 10196919

Manufacturer No.: 46638521659

M5x12,5x0,5

BMW Motorrad

Item No.: 10196913

Manufacturer No.: 46638521653

M5x14,5-A2-70

BMW Motorrad

Item No.: 10126400

Manufacturer No.: 23008569916

30X40X0,7

BMW Motorrad

Item No.: 10126404

Manufacturer No.: 23008569927

M24X1,5

BMW Motorrad

Item No.: 10015654

Manufacturer No.: 83105A6D0B5

BMW Motorrad chain spray is a fully synthetic lubricant specially developed for motorcycle drive chains. After spraying, the water-repellent film withstands even longer rides with heavy rain and temperatures up to 200 °C. In addition, special anti-corrosion agents protect the chain, sprocket and transmission wheel from damage caused by aggressive moisture or salt. The BMW chain spray is suitable for standard chains as well as for O-ring and X-ring chains. Due to the low-viscosity consistency in combination with solvents and penetrating oil, the product can penetrate the lubrication points excellently. Specially adhesive polymers provide a dense and well adhering lubricating film after evaporation of the solvent. The formula of the spray is unique and was developed specifically for BMW Motorrad. Application: Before using with chain spray, remove coarse, loose dirt from the chain using a rag or copper wire brush. Spray chain spray sparingly and evenly on the clean and dry surface of the chains from the inside to the outside; while doing this, turn the rear wheel slowly by hand so that the lubricant is distributed on the chain wheel and the gear wheel. Allow lubricant to dry for 10 to 20 minutes (depending on outside temperature) so that it can be absorbed into the lubrication points and develop the highest possible adhesion. Opened containers must be tightly closed after use. The product should be applied at temperatures above 15 °C. At lower temperatures, the product must dry correspondingly longer.

BMW Motorrad

Item No.: 10019829

Manufacturer No.: 83105B311D4

BMW Motorrad chain spray is a fully synthetic lubricant that has been specially developed for motorcycle drive chains. Once sprayed on, the water-repellent film can withstand even long journeys in heavy rain and temperatures of up to 200 °C. In addition, special anti-corrosion agents protect the chain, sprocket and transmission sprocket from damage caused by aggressive moisture or salt. The BMW chain spray is suitable for standard chains as well as for O-ring and X-ring chains. Due to the low-viscosity consistency in combination with solvents and penetrating oil, the product can penetrate the lubrication points excellently. After evaporation of the solvent, specially adhesive polymers ensure a dense and well adhering lubricating film. The formula of the spray is unique and was specially developed for BMW Motorrad. Application: Before using chain spray, remove coarse, loose dirt from the chain using a cloth or a copper wire brush. Spray the chain spray sparingly and evenly on the clean and dry surface of the chain from the inside to the outside, while slowly turning the rear wheel manually so that the lubricant is distributed on the chain wheel and the gear wheel. Allow the lubricant to dry for 10 to 20 minutes (depending on the outside temperature) so that it can penetrate the lubrication points and develop the best possible adhesion. Opened containers must be tightly sealed after use. The product should be applied at temperatures above 15 °C. At lower temperatures, the product must dry correspondingly longer.