Chain drive

BMW Motorrad

Item No.: 10136001

Manufacturer No.: 27717700154

16 Z

BMW Motorrad

Item No.: 10800590

Manufacturer No.: 23005B3EE58

16 Z

BMW Motorrad

Item No.: 10136002

Manufacturer No.: 27717700397

15 Z

BMW Motorrad

Item No.: 10136055

Manufacturer No.: 27727682439

112

BMW Motorrad

Item No.: 10135998

Manufacturer No.: 27717696860

Z=47

BMW Motorrad

Item No.: 10135995

Manufacturer No.: 27717696650

Z=47

BMW Motorrad

Item No.: 10136017

Manufacturer No.: 27717716859

Z=47

BMW Motorrad

Item No.: 10136064

Manufacturer No.: 27727696676

BMW Motorrad

Item No.: 10136063

Manufacturer No.: 27727696675

BMW Motorrad

Item No.: 10195383

Manufacturer No.: 46637708777

M5x9

BMW Motorrad

Item No.: 10164127

Manufacturer No.: 34328520847

BMW Motorrad

Item No.: 10141817

Manufacturer No.: 31427708941

M6

BMW Motorrad

Item No.: 10136071

Manufacturer No.: 27727696747

BMW Motorrad

Item No.: 10136073

Manufacturer No.: 27727697001

8X22X7

BMW Motorrad

Item No.: 10136067

Manufacturer No.: 27727696720

BMW Motorrad

Item No.: 10062662

Manufacturer No.: 07119901033

M8x45-8.8

BMW Motorrad

Item No.: 10065366

Manufacturer No.: 07129904261

M8X55

BMW Motorrad

Item No.: 10136068

Manufacturer No.: 27727696721

BMW Motorrad

Item No.: 10015654

Manufacturer No.: 83105A6D0B5

BMW Motorrad chain spray is a fully synthetic lubricant specially developed for motorcycle drive chains. After spraying, the water-repellent film withstands even longer rides with heavy rain and temperatures up to 200 °C. In addition, special anti-corrosion agents protect the chain, sprocket and transmission wheel from damage caused by aggressive moisture or salt. The BMW chain spray is suitable for standard chains as well as for O-ring and X-ring chains. Due to the low-viscosity consistency in combination with solvents and penetrating oil, the product can penetrate the lubrication points excellently. Specially adhesive polymers provide a dense and well adhering lubricating film after evaporation of the solvent. The formula of the spray is unique and was developed specifically for BMW Motorrad. Application: Before using with chain spray, remove coarse, loose dirt from the chain using a rag or copper wire brush. Spray chain spray sparingly and evenly on the clean and dry surface of the chains from the inside to the outside; while doing this, turn the rear wheel slowly by hand so that the lubricant is distributed on the chain wheel and the gear wheel. Allow lubricant to dry for 10 to 20 minutes (depending on outside temperature) so that it can be absorbed into the lubrication points and develop the highest possible adhesion. Opened containers must be tightly closed after use. The product should be applied at temperatures above 15 °C. At lower temperatures, the product must dry correspondingly longer.

BMW Motorrad

Item No.: 10019829

Manufacturer No.: 83105B311D4

BMW Motorrad chain spray is a fully synthetic lubricant that has been specially developed for motorcycle drive chains. Once sprayed on, the water-repellent film can withstand even long journeys in heavy rain and temperatures of up to 200 °C. In addition, special anti-corrosion agents protect the chain, sprocket and transmission sprocket from damage caused by aggressive moisture or salt. The BMW chain spray is suitable for standard chains as well as for O-ring and X-ring chains. Due to the low-viscosity consistency in combination with solvents and penetrating oil, the product can penetrate the lubrication points excellently. After evaporation of the solvent, specially adhesive polymers ensure a dense and well adhering lubricating film. The formula of the spray is unique and was specially developed for BMW Motorrad. Application: Before using chain spray, remove coarse, loose dirt from the chain using a cloth or a copper wire brush. Spray the chain spray sparingly and evenly on the clean and dry surface of the chain from the inside to the outside, while slowly turning the rear wheel manually so that the lubricant is distributed on the chain wheel and the gear wheel. Allow the lubricant to dry for 10 to 20 minutes (depending on the outside temperature) so that it can penetrate the lubrication points and develop the best possible adhesion. Opened containers must be tightly sealed after use. The product should be applied at temperatures above 15 °C. At lower temperatures, the product must dry correspondingly longer.