Chain drive

BMW Motorrad

Item No.: 10135986

Manufacturer No.: 27712345694

BMW Motorrad

Item No.: 10125697

Manufacturer No.: 23002343191

16 Z

BMW Motorrad

Item No.: 10136042

Manufacturer No.: 27722345586

BMW Motorrad

Item No.: 10135990

Manufacturer No.: 27712345857

Z=47

BMW

Item No.: 10062834

Manufacturer No.: 07119902248

ST4,8X13 SWH-ZN

BMW Motorrad

Item No.: 10136037

Manufacturer No.: 27722345360

BMW Motorrad

Item No.: 10136036

Manufacturer No.: 27722345359

BMW Motorrad

Item No.: 10135319

Manufacturer No.: 26112345365

M8X50

BMW Motorrad

Item No.: 10107228

Manufacturer No.: 16112345084

8,5X24X2

BMW Motorrad

Item No.: 10135318

Manufacturer No.: 26112345364

14,3X19,5X33

BMW Motorrad

Item No.: 10136044

Manufacturer No.: 27722345831

BMW Motorrad

Item No.: 10136035

Manufacturer No.: 27722345358

8,3X14X34

BMW

Item No.: 10126601

Manufacturer No.: 23017840338

M8X80

BMW Motorrad

Item No.: 10136038

Manufacturer No.: 27722345362

SW

BMW Motorrad

Item No.: 10136039

Manufacturer No.: 27722345363

BMW Motorrad

Item No.: 10173695

Manufacturer No.: 36312345495

M8

BMW Motorrad

Item No.: 10136040

Manufacturer No.: 27722345480

D=13,95X2,62

BMW Motorrad

Item No.: 10136043

Manufacturer No.: 27722345650

SCHWARZ

BMW Motorrad

Item No.: 10136049

Manufacturer No.: 27722346019

BMW Motorrad

Item No.: 10117941

Manufacturer No.: 18112345087

M6X16

BMW Motorrad

Item No.: 10136041

Manufacturer No.: 27722345567

BMW Motorrad

Item No.: 10015654

Manufacturer No.: 83105A6D0B5

BMW Motorrad chain spray is a fully synthetic lubricant specially developed for motorcycle drive chains. After spraying, the water-repellent film withstands even longer rides with heavy rain and temperatures up to 200 °C. In addition, special anti-corrosion agents protect the chain, sprocket and transmission wheel from damage caused by aggressive moisture or salt. The BMW chain spray is suitable for standard chains as well as for O-ring and X-ring chains. Due to the low-viscosity consistency in combination with solvents and penetrating oil, the product can penetrate the lubrication points excellently. Specially adhesive polymers provide a dense and well adhering lubricating film after evaporation of the solvent. The formula of the spray is unique and was developed specifically for BMW Motorrad. Application: Before using with chain spray, remove coarse, loose dirt from the chain using a rag or copper wire brush. Spray chain spray sparingly and evenly on the clean and dry surface of the chains from the inside to the outside; while doing this, turn the rear wheel slowly by hand so that the lubricant is distributed on the chain wheel and the gear wheel. Allow lubricant to dry for 10 to 20 minutes (depending on outside temperature) so that it can be absorbed into the lubrication points and develop the highest possible adhesion. Opened containers must be tightly closed after use. The product should be applied at temperatures above 15 °C. At lower temperatures, the product must dry correspondingly longer.

BMW Motorrad

Item No.: 10019829

Manufacturer No.: 83105B311D4

BMW Motorrad chain spray is a fully synthetic lubricant that has been specially developed for motorcycle drive chains. Once sprayed on, the water-repellent film can withstand even long journeys in heavy rain and temperatures of up to 200 °C. In addition, special anti-corrosion agents protect the chain, sprocket and transmission sprocket from damage caused by aggressive moisture or salt. The BMW chain spray is suitable for standard chains as well as for O-ring and X-ring chains. Due to the low-viscosity consistency in combination with solvents and penetrating oil, the product can penetrate the lubrication points excellently. After evaporation of the solvent, specially adhesive polymers ensure a dense and well adhering lubricating film. The formula of the spray is unique and was specially developed for BMW Motorrad. Application: Before using chain spray, remove coarse, loose dirt from the chain using a cloth or a copper wire brush. Spray the chain spray sparingly and evenly on the clean and dry surface of the chain from the inside to the outside, while slowly turning the rear wheel manually so that the lubricant is distributed on the chain wheel and the gear wheel. Allow the lubricant to dry for 10 to 20 minutes (depending on the outside temperature) so that it can penetrate the lubrication points and develop the best possible adhesion. Opened containers must be tightly sealed after use. The product should be applied at temperatures above 15 °C. At lower temperatures, the product must dry correspondingly longer.